Ionic System V4 THERMOPURE 300L to 1000L 0ppm (particles per million)

Ionic System V4 THERMOPURE 300L to 1000L 0ppm (particles per million) - Ionic Systems®

Simple Systems for Simple Cleaning Since its introduction, the Reach & Wash® system has undergone several revisions. The V4 system represents the latest, fourth generation of the Reach & Wash® vehicle mount.

Having pure water on board means window cleaning begins within minutes of arriving on site with minimal setup time. The V4 uses Ionic's latest filter housings with replaceable filter cartridges mounted vertically on our crash-tested stainless steel frame. The V4 benefits from the use of John Guest fittings, ensuring a sleek, leak-free design. The standard V4 is available in a range of tank sizes from 300 to 1,000 liters to fit all types of commercial vans and requires only tap water pressure (min. 45 psi) to filter tap water to a purity of zero parts per million.

If a water supply is available on-site, the V4 system can treat pure water in the tank while the 12-volt pumps provide pure water for cleaning. The standard V4 includes a 12-volt pure water delivery pump powered by a variable pump speed controller, automatic tank-full shutoff, and a water level indicator.

ADDITIONAL BENEFITS:
Crash-tested steel component frame to FMVSS-208.
110-amp battery.
4-stage water treatment.
Water meter.
Dual TDS meters.
Water pressure gauge.
Automatic refill shutoff.
Self-compensating flow switch(es).
Remote pump activation.
OPTIONAL EXTRAS:
Additional 12-volt delivery pump and pump control.
240V or 110V fast-fill pump.
Independent battery.
Split-charge relay.
AC battery charger.
High-pressure stainless steel filter housings.
Thermopure™ hot water upgrade (with HotBox™).
Welcome to MEG OHM

Window cleaners are learning more about the spot-free benefits of cleaning windows with ultrapure water measured in the megohm range.
and V4™ takes its place as a premium brand manufacturer. With a 10-year warranty on the stainless steel frame, the FMVSS-208 crash-tested design, and a host of Meg Ohm technologies, V4™ represents the best value for money truck-mounted systems on the market.

PFS™ – Periodic Flush System. Upon startup, this feature automatically flushes the reverse osmosis membrane for 2 minutes. The RO system is then flushed for 2 minutes every hour during the refill process.

The V4™ truck bed has undergone a complete overhaul, resulting in an impressive 10% weight reduction for improved payload capacity and a 100 mm lower center of gravity for improved vehicle maneuverability.

In addition, the V4™ features technological options to improve filter performance, RO membrane life, and water quality.

Thanks to new technologies such as periodic automatic flushing, ROMS™, and PDI™, the V4™'s water quality improves to below zero ppm.

ROMS™ – Reverse Osmosis Maintenance System.
At the end of each tank refill, pure water is diverted to the RO membrane housing. Letting the RO membrane soak in pure water between fills ensures that dissolved solids (found in tap water) do not foul the membrane. Additionally, dissolved solids not removed from the membrane surface during periodic automatic flush cycles are absorbed by the pure water during the "rest period" and removed during the first flush at startup.

PDI™ – Perpetual Deionization. This feature significantly extends the contact time of the DI resin. Ultra-purification is achieved by repeatedly exposing the purified water to the final DI polishing step.